[mc1322x] mc1322x Contiki is getting initialized in the wrong order

[Jon Smirl]

The UIP process is getting started before Contiki boots....

Process test UDP sender started
Local IPv6 address:  0000:0000:0000:0000:0000:0000:0000:0000
Created connection with remote peer
fe80:0000:0000:0000:0002:03ff:fe03:0303 local/remote port 61617/61616

When Contiki boots it initializes networking,,,

********BOOTING CONTIKI*********
uip_init

Which wipes out those sockets created by process test UDP.

--------------------------------------------------------------------------------------------------------------------------------------


jonsmirl at terra:/home/apps/contiki-mc1322x/examples/udp-sender-ipv6$
mc1322x-load.pl -f example-udp-sender.bin
...CONNECT
Size: 62040 bytes
Sending example-udp-sender.bin
done sending files.
performing ring osc cal
crm_status: 0xc0080
sys_cntl: 0x18
ring osc cal complete
cal_count: 0x1c3ce83
cal factor: 810

rhib_wake_secs: 16200

rsetting xmac to use calibrated rtc value
xmac_config.on_time 81
xmac_config.off_time 8019
xmac_config.strobe_time 9639
xmac_config.strobe_wait_time 70
Rime started with address 2.2.1.255.254.1.1.1
Process test UDP sender started
Local IPv6 address:  0000:0000:0000:0000:0000:0000:0000:0000
Created connection with remote peer
fe80:0000:0000:0000:0002:03ff:fe03:0303 local/remote port 61617/61616

********BOOTING CONTIKI*********
uip_init
Scheduling DAD for ipaddr: fe80:0000:0000:0000:0002:01ff:fe01:0101
Scheduling RS
 sicslowmac channel 24
uip_init
uip: DAD already running
Scheduling RS
uIP started with IP address 0.0.0.0
Local IPv6 address:  fe80:0000:0000:0000:0002:01ff:fe01:0101
System online.
Sending NS to ff02:0000:0000:0000:0000:0001:ff01:0101 from
0000:0000:0000:0000:0000:0000:0000:0000 with target address
fe80:0000:0000:0000:0002:01ff:fe01:0101
sicslowpan output: sending packet len 64
sicslowpan output: header of len 36
6MAC-UT:  1 ffff:0000:0000:0000 15 60 (75)


-- 
Jon Smirl
jonsmirl at gmail.com