[mc1322x] Windows.

[Mariano Alvira]

Thanks as always Umberto!

On Thu, Oct 01, 2009 at 12:17:52PM +0200, Umberto Manzoli wrote:
>
>  2. the provided mc1322x flash loader has to be compiled with IAR:
>       □ it is possible to employ IAR EW-ARM kickstart (limited to 32kbytes of
>         binary code) to compile the flasher (or adapt your flasher to the
>         console application protocol).

Adapting my flasher to their protocol should not be too difficult.

> Next step is to get a good JTAG interface. We had some Segger adapters, so we
> did not look for other ones. Latest openocd is a good starting point to make
> the adapter work as a GDB/TCP server.
> Then you can employ the command-line gdb provided with CodeSourcery LITE or the
> insight package from Yagarto.

Now that you mention it, I also get quite a few questions about the
JTAG interface. Last time I tried it seemed OpenOCD was finally stable
enough with the Segger to make some progress writting an OpenOCD flash
driver. We also have some prototype JTAG hardware based on the
FT2232H, but it seems like OpenOCD support for that chip is still
broken...

-Mar.