[mc1322x] Integrating JTAG in the next design

[Justin Rigling]

On Thu, 2009-10-22 at 09:16 -0400, Mariano Alvira wrote:
> On Thu, Oct 22, 2009 at 07:40:45AM -0400, Jon Smirl wrote:
> > On Thu, Oct 22, 2009 at 4:32 AM, Mariano Alvira <mar at devl.org> wrote:
> > > On Wed, Oct 21, 2009 at 08:43:02PM -0400, Jon Smirl wrote:
> > 
> > The OpenOCD ft2232 driver complaints are all centered around the GPL
> > and the closed source FTDI driver on windows. It's not really a
> > technical argument.
> 
> Oh ok. That's good to know. Then there is really nothing holding up
> progress --- other than lack of time. Justin (another redwire guy)
> spun a ft2232 board than I think just needs an adapter from the .1in
> header to the 0.5in header on the module. So if someone is really
> gung-ho about getting JTAG up an running then I can probably get some
> hardware in their hands.
> 
The board I designed used the FT2232HL. I haven't payed much attention
to see if it is supported by OOCD as well as the slower, more popular
version. 

Justin


> -Mar.
> 
> 
> _______________________________________________
> mc1322x mailing list
> mc1322x at devl.org
> http://devl.org/cgi-bin/mailman/listinfo/mc1322x