[mc1322x] compiling webserver-ipv6 in contiki/examples folder

[Chol Su Kang]

On Thu, Apr 29, 2010 at 8:08 AM, Joakim Eriksson <joakime at sics.se> wrote:
> Mariano Alvira skrev 2010-04-29 16:05:
>>
>> On Wed, Apr 28, 2010 at 05:46:12PM -0700, Chol Su Kang wrote:
>>>
>>> For those who are interested in having builds for Freescale Network
>>> Controller board, I created a patch to support the board,
>>> freescale-ncb. Please see attached.
>>
>> Thanks! I've pulled this into WIP-2.4 and will add the board to
>> libmc1322x as well. By-the-way, it's easier to add the board to
>> libmc1322x first as a patch and then add the platforms to Contiki
>> (which will pull the board from libmc1322x)...
I am glad that I contributed a little.
Next time, I will try to patch in libmc1322x first, then to the
platform to Contiki.

I have just tested the same blink, printf, and rftest-tx bin files in
Freescale MC1322x Sensor Reference Board (SRB).
The same bin files built in Network Controller Board (NCB) worked in
SRB as well.
So, I am thinking whether I should create another board, freescale-srb?
What do you think?

>>
>> The platform will need to be updated for the master branch, however,
>> but that is a bit of a mess right now so I didn't bother.
>>
>> Most of the platform code is going to be in common between platforms
>> anyway --- so I'd really like a way to do this.
>>
>> Joakim has there been any further thoughts on configuring Contiki
>> platforms? Jon and myself had an email thread going with Adam about
>> this --- I'm not sure if that was on the main list or not.
>
> Well, we have discussions on this now and then. Most of the files
> (main, contiki-conf, etc) are always almost the same between many
> platforms. Niclas is probably soon going to check-in a JCreate platform
> that "inherits" files from the Tmote Sky platform. That might provide
> some inspiration for other platforms.
>
>> Right now, for instance, the redbee-econotag conf and
>> contiki-mc1322x-main are very similar to those for the sky platform
>> (I'm talking about the master branch). It seems like there alot of
>> Conitki specific only config options that you'd want to apply across
>> all platforms, but no way that I know of to do this...
>
> I know, and it would be really nice if it would be possible to configure
> the networking part as its own config since most of the IPv6/IPv4 or Rime
> configurations are the same.
>
>
> Best regards,
> -- Joakim Eriksson, SICS
>
>> -Mar.
>>
>>
>> _______________________________________________
>> mc1322x mailing list
>> mc1322x at devl.org
>> http://devl.org/cgi-bin/mailman/listinfo/mc1322x
>
>
> _______________________________________________
> mc1322x mailing list
> mc1322x at devl.org
> http://devl.org/cgi-bin/mailman/listinfo/mc1322x
>