[mc1322x] OpenOCD custom proc

[Jon Smirl]

On Mon, Jun 7, 2010 at 12:06 PM, Daniel Berenguer
<dberenguer at usapiens.com> wrote:
> Sorry guys to come back with basic issues...
>
> I'm trying to flash a binary into one of my EconoTags through a single
> OpenOCD command as follows:
>
> openocd -f ../openocd.cfg -c "run blink-green_redbee-econotag.bin"
>
> but I'm getting this error:
>
> Runtime error, file "../openocd.cfg", line 80:
> invalid command name "soft_reset_halt"

Mar can explain the error...

You don't have to flash the mc13224 chips. The chips have 96KB of RAM
on them. Just send your code into RAM and run it. Only flash when your
code is working and you want to unplug the econotag and take it
somewhere else. Developing out of RAM is many times faster than
flashing.


>
> Same thing with "load_image" if I comment the above command in openocd.cfg.
>
> I'm currently using Mar's cfg file with the latest OpeOCD version (0.4.0)
>
> On my old OpenOCD version (0.0), I used to halt/wait_halt instead of
> soft_reset_halt. As for writing new images I used "flash write"
> instead of load_image. The funny thing is that OpenOCD is accepting
> both commands via telnet but not through the custom "run" proc.
>
> Any help is appreciated. Thanks!
>
> Daniel.
>
> _______________________________________________
> mc1322x mailing list
> mc1322x at devl.org
> http://devl.org/cgi-bin/mailman/listinfo/mc1322x
>



-- 
Jon Smirl
jonsmirl at gmail.com