[mc1322x] OpenOCD custom proc

[Jon Smirl]

On Mon, Jun 7, 2010 at 1:14 PM, Daniel Berenguer
<dberenguer at usapiens.com> wrote:
> Yes, that's an option... So in your daily job you just write the RAM
> through serial? I may do this too I guess, to avoid useless flash

That's what I do. I've never flashed my development boards from Mar.

> writes during development.
>
> Thanks Jon for this remark.
>
> Daniel.
>
>
> On 7 June 2010 18:54, Jon Smirl <jonsmirl at gmail.com> wrote:
>> On Mon, Jun 7, 2010 at 12:06 PM, Daniel Berenguer
>> <dberenguer at usapiens.com> wrote:
>>> Sorry guys to come back with basic issues...
>>>
>>> I'm trying to flash a binary into one of my EconoTags through a single
>>> OpenOCD command as follows:
>>>
>>> openocd -f ../openocd.cfg -c "run blink-green_redbee-econotag.bin"
>>>
>>> but I'm getting this error:
>>>
>>> Runtime error, file "../openocd.cfg", line 80:
>>> invalid command name "soft_reset_halt"
>>
>> Mar can explain the error...
>>
>> You don't have to flash the mc13224 chips. The chips have 96KB of RAM
>> on them. Just send your code into RAM and run it. Only flash when your
>> code is working and you want to unplug the econotag and take it
>> somewhere else. Developing out of RAM is many times faster than
>> flashing.
>>
>>
>>>
>>> Same thing with "load_image" if I comment the above command in openocd.cfg.
>>>
>>> I'm currently using Mar's cfg file with the latest OpeOCD version (0.4.0)
>>>
>>> On my old OpenOCD version (0.0), I used to halt/wait_halt instead of
>>> soft_reset_halt. As for writing new images I used "flash write"
>>> instead of load_image. The funny thing is that OpenOCD is accepting
>>> both commands via telnet but not through the custom "run" proc.
>>>
>>> Any help is appreciated. Thanks!
>>>
>>> Daniel.
>>>
>>> _______________________________________________
>>> mc1322x mailing list
>>> mc1322x at devl.org
>>> http://devl.org/cgi-bin/mailman/listinfo/mc1322x
>>>
>>
>>
>>
>> --
>> Jon Smirl
>> jonsmirl at gmail.com
>>
>
> _______________________________________________
> mc1322x mailing list
> mc1322x at devl.org
> http://devl.org/cgi-bin/mailman/listinfo/mc1322x
>



-- 
Jon Smirl
jonsmirl at gmail.com